LT87121 —eDPx 到 eDP/DP 转换器

LT87121 —eDPx 到 eDP/DP 转换器

LT87121

1. 说明

LT®87121 是一款高性能 eDPx 至 eDP/DP 转换器，专为将 eDPx 源连接至一个 eDP/DP 灌电流而设计。
该器件能够自动操作，由集成微处理器启用，该微处理器使用嵌入式SPI闪存进行固件存储。系统控制也可以通过使用专用的配置 I2C 从接口来实现。

2. 特点

• eDPx 接收器
• eDP/DP 发射器
• 其他

3.应用
LT87121.png

LT87121_U2_Brief_R1.0-1下载

分享这篇文章

相关文章

LT9102—MIPI Single-port to MIPI Dual-port

 Single-Port MIPIDSI/CSI Receiver Complian twith D-PHY2.1&DSI1.1&CSI-22.0- 1clock laneand1/2/3/4configurabledata lanes perport- Up to4.5Gbps per data lane Complian twith C-PHY1.2&DSI-21.0&CSI-22.0- 1/2/3configu... 阅读更多

LT9201 — MIPI Dual-port to MIPI Single-port

⚫ Dual-Port MIPI DSI/CSI Receiver▪ Compliant with D-PHY2.1 & DSI 1.1 & CSI-2 2.0 - Support 1/2 configurable ports -... 阅读更多

LT4079：USB2.0/USB3.2Gen1 to SPI/TTL/MIPI/LVDS/eDP

USB2.0/USB3.2Gen1 显卡 USB2.0/USB3.2Gen1 to SPI/TTL/MIPI/LVDS/eDP Converter USB Support 1 USB port Support USB device mode only Support USB2.0 and USB3.2 Gen1 Support... 阅读更多

LT4911：USB2.0/USB3.2Gen1 to MIPI/LVDS

USB2.0/USB3.2Gen1 显卡 USB2.0/USB3.2Gen1 to MIPI/LVDS Converter ScreenMaximum resolution 1920X1080@60fps USB Support 1 USB port Support USB device mode only Support USB2.0 and USB3.2... 阅读更多

LT3011：USB2.0 to TTL USB显卡

LT3011 USB2.0 to TTL Converter Screen: 4-7 InchesMaximum resolution 1280X720@60fps USB Support 1 USB port Support USB device mode only Support USB2.0 Support... 阅读更多

USB2.0显卡 LT3010

USB2.0/USB3.2Gen1 to SPI/I2C/UART/TTL/MIPI/LVDS/eDP LT3010 USB2.0 to SPI/I2C/UART Converter < 3.5 InchesSPI ScreenMaximum Resolution 480X320@15Hz or320X240@25Hz USBSupport 1 USB portSupport USB device mode onlySupport USB2.0Support... 阅读更多

Lontium USB2.0 Extender 选型表

USB2.0 Extender： Product Selection USB2.0 ExtenderLT8311XE-QLT8312LT8311SXLT8311EXSingle-ChipModeSupport√√××CableEthernet/USBEthernet/USB××Distance10m10m××Dual-ChipModeSupport√√√√CableEthernet/USB CableEthernet/USB CableEthernet/USB CableEthernet CableDistance20m Max20m Max60m Max120m MaxDemux×√××Control ModeI2C/GPIOBy external MCUI2C/GPIOBy external MCUIntegrated MCUI2C/GPIOBy external MCUPackageQFN16-4x4QFN20-4x4QFN64-7.5x7.5TSSOP20 Note:  The extended distance is for reference only, that is affected by cable. Technical Documentation Product NamePackageDescriptionStatusDownloadLT8311XE-QQFN16-4x4USB2.0 ExtenderMP 阅读更多

Lontium  USB2.0 Repeater 选型表

USB2.0 Repeater： Product Selection USB2.0 RepeaterLT8311X1LT8311X3CompatibilityUSB 2.0, OTG 2.0 and BC 1.2USB 2.0, OTG 2.0 and BC 1.2Signal SupportHS, FS, LSHS, FS, LSFunctionAC Compensation ①√√DC Compensation ①×√ExtenderFPC Cable30cm60cmUSB Cable3m4mPackageQFN12-1.6x1.6QFN12-1.6x1.6Pin-to-PinLT8311X1 Note:  1.AC loss - due to capacitive load which will affects the edges. 2.DC loss - due to resistive loss... 阅读更多