LT8713SX 是一款高性能 Type-C/DP1.4 至 Type-C/DP1.4/HDMI2.0 转换器，具有三个可配置的 DP1.4/HDMI2.0/DP++ 输出接口和音频输出接口。LT8713SX同时支持显示端口™单流传输（SST）模式和多流传输（MST）模式。当接收通过单个DP链路打包和传输的多个视频/音频流时，LT8713SX将分组的多流恢复为多个不同的视频/音频流。在 SST 模式下，三个 TX 接口输出相同的视频流/音频流。此外，还包括三个用于CC通信的CC控制器，以实现DP Alt模式和供电功能，一个用于上游Type-C端口，一个用于下游端口，最后一个用于供电。片上USB3.0开关是一种高速双向无源开关，提供灵活的开关以适应连接器翻转。

提供两个数字音频输入或输出接口，包括 I2S 和 SPDIF。两者都支持最大 8KHz 采样率的 192 通道 LPCM 或压缩音频。

该器件能够自动操作，由集成微处理器启用，该微处理器使用嵌入式SPI闪存进行固件存储。系统控制也可以通过使用专用的配置 I2C 从接口来实现。

The LT8713SX is a high performance Type-C/DP1.4 to Type-C/DP1.4/HDMI2.0 converter, with three configurable DP1.4/HDMI2.0/DP++ output interfaces and audio output interface.

LT8713SX supports both the DisplayPort™ Single Stream Transport(SST )mode and Multi-Stream Transport (MST)  mode. When receiving the multiple video/audio streams which are packetized and transmitted over a single DP link, LT8713SX recovers the packetized Multi-streams to multiple different video/audio streams.

In SST mode, three TX interfaces output the same video stream/audio stream. Also, three CC controllers are included for CC communication to implement DP Alt Mode and power delivery function, one for upstream Type-C port one for downstream port, and the last for power delivery.

On-chip USB3.0 switch is a high-speed bi-directional passive switch which provides flexible switching to accommodate connector flipping.

Two digital audio input or output interfaces are available, including I2S and SPDIF. Both support 8-ch LPCM or compressed audio at maximum 192KHz sample rate.

The device is capable of automatic operation which is enabled by an integrated microprocessor that uses an embedded SPI flash for firmware storage. System control is also available through the use of a dedicated configuration I2C slave interface.